5 Types Best DIY Projector Screen of 2023: Ultimate Guide

There is nothing better than a media room that uses a great projector. However, you will get the observing contraction from projectors that can be just as perfect as the screen itself, which could cost higher than $500.

A DIY projector display screen is a pleasant look around as it is less expensive and permits you to use financial savings to improve your sound machine. Occasionally, it is even better than the ones that you can collect from different stocks.

If someone wants to assemble a DIY projector display screen, then they will have four better options. 

  • Someone can construct a painted display.
  • One can construct a drapery display screen.
  • You can build up a permanent display screen.
  • Anyone can design a portable display.

Everyone has their unique creation necessities, but all are conceivable by using themselves.

A painted wall is the best way to have a projector display, but it is tedious and vulnerable to inadequacy. So, building all of those projector screens will help you discover theanine in your media room. Sticking around as we talk about those in extraordinary design and, surely, help you store a few hundred bucks to improve your entertainment gadget.

Calculating Your DIY Projector Screen

It is critical to recognize the gap you need to conceive between your screen and projector earlier about anything else. We check with it because of the “Throw Distance.” As it consistently is comparable with the picture length which you will assign to the display screen.

If your projector has an integrated zoom lens, you’ll be capable of increasing the image size without converting your projector’s distance from the display screen.

It can be complex to approximately undergo all the information you need to know about Throw Distance; however, the details will be smoother. Here’s a reachable-dandy projection calculator that you may use to calculate the gap you’ll need for almost any projector.

Everyone is welcomed greatly. Now, it is encouraged directly to construct your projector displays based totally on the Throw Distance to your projector.

#1: DIY Projector Screen with Paint

Projector Screen Paint

If you have restrained finances and don’t want to allocate an excessive amount of time, the perfect way to build a projector display is by way of locating a wall big enough to provide as your display. Before you detect it, the simplest component left a good way to do when you detect it is to cope with the largest flaw of painted displays—rough exterior.

When you have a flat wall, your handiest wants to paint the phase you will adopt as your display screen. Some things are a bit one of a kind, even if you have an irregular exterior. If you use plyboard pieces and it will still be susceptible to disfigurement, that could affect your observing revel in without delay. A painted wall display may be the best and most inexpensive, but it’s not for everybody.

So earlier than you begin this method, make sure that your wall is unchained from disfigurement. Once you have got it looked after; then you can continue with the necessary steps given below:

1. Get the big picture before building your screen before 

If you start functioning on something, then the first step you need to do is to parent out how massive your display screen ought to be—then calculating your Throw Distance to decide how distant your projector has to be from the display screen and how massive the projection can occur.

2. Paint the entire section of your wall

Before you start functioning on something, the first step you need to do is parent out how massive your display screen ought to be—then calculating your Throw Distance to decide how distant your projector has to be from the display screen and how massive the projection can be.

Certainly, you are not going to use the entire segment of your wall as the display. However, you still want to recoat it to do away with disfigurement conspicuous on the wall. It also produces an assessment and protects the paint from drizzle on your display screen.

While portraying, we opt to use the paints encouraged in this text. The thing also provides an accompany on which type and shade of paint to apply.

3. Paint the area that you’ll use as your screen

Taking some time while portraying and making sure that it’s loose from any disfigurement that might affect your observing action. Some steps may help in creating a superbly painted display screen:

  • Use sandpaper to flatten the place and do away with holes, fractures, or crashes that could affect your projector display screen exterior and deform photographs.
  • Use overlaying tape to create the boundary to your display screen, but make certain your vicinity it outside the boundary. It is favorable to use scotch 1.88″ overlaying tape from amazon as it creates enough room for defects when painting the display.
  • Practice the primer earlier than the first paint to improve the attachment and sturdiness of your display screen.
  • While coating, it would be fine to use a small coat roller to even out the floor and save your coating from drizzle to the rims.
  • Apply extra paint as wanted until you gain an easy, wonderful ending
Scotch 2025-48C General Use Masking Tape for Basic Painting, 1.88 inches by 60 Yards, 2025, 1 roll,...
  • USE-ON SURFACES: Designed for use on vinyl, carpet, metal, and plastic
  • SIZE: 1.88 in. x 60.1 yd
  • PACK OUT: 1 Roll/Pack
  • SUSTAINABILITY: Made from 50% renewable resources; Adhesive made with natural rubber; Tape made in a site certified for energy management (ISO 50001 certified); Core made with 70% post-consumer waste

4. Add a frame as a finishing touch to create more depth.

Adding a frame step is non-compulsory; however, it brings a painted projector display screen to a perfectly new level; thus, it could be easy to change your covering tape with black velvet or felt tape. For this system, it is preferred the usage of Pllieay 1.96″ felt tape.

That’s it! With the right setup, you’ll be capable of creating a stunning, painted projector display screen without spending loads of time, cash, and attempt in constructing.

Pllieay 1 Pack Felt Tape in Self Adhesive, Polyester Felt Tape Furniture Felt Strips 1.96 inch x...
  • Size and color: 1.96 inch x 0.04 inch x 14.7 feet felt strip with black color, easily matching any flooring and decor
  • Dust proof, shock-absorbing, sound and heat insulation, anti-skidding and insulating, widely used in various door seal, window insulation, furniture, electrical cabinets, cars, speakers, toys, sports equipment and more
  • Easy to use and install: Made of felt, easily cut to whatever the size you need, just peel and stick it under book case, computers, sofas, chairs, vase, flowerpot to avoid skidding, scratching and marring
  • Wide applications: Great protection for furniture and hard surfaces, perfect to protect hardwood, floors, tile, linoleum, table or chair leg and more from scratching and marring. Perfect for diy crafts and noise elimination

#2: DIY Screen with Fabric or Blackout Cloth

Blackout Fabric

Suppose a painted projector display screen isn’t your component. In that case, you won’t just like the concept of setting out to the fundamentals of constant or transportable monitors; then, possibly, a certain display might be perfect for you. It’s a curtain that uses white sheet, curtain backing, white canvas, preferably blackout fabric so that it will be provided as scenery in your projector.

Anyone can suspend the curtain display in numerous ways, but the simplest and most comparatively cheap is fiction. It works incredible for each indoor and outdoor observation as it’s good to set up. Side by side, you shouldn’t degree your Throw Distance right down to the remaining inch.

Setting up a curtain display screen is straightforward. It will be working most effectively and need an outstanding blackout cloth, like the Nicetown white curtain panels. You might then cloak those panels flat to defamation, then maintaining them in an area with a fastening. You should ensure that it won’t receive any creases or folds while positioned because it’ll spoil your viewing enjoyment.

67,939 Reviews
NICETOWN 100% Blackout Window Curtain Panels, Cold and Full Light Blocking Drapes with Black Liner...
  • Ready Made: 2 panels per package. Each Classic Lined Curtain measures 52" wide x 84" long (Total width is 104"). The unique design of the silver grommet (1.6 inch inner diameter) creates casual elegance for your house, which makes the curtains easy to install and slide.
  • Blackout Effect: The real blackout curtains on the market. Sew in black liner backing makes the drapes thick enough to completely keep out the sunlight and uv ray. The benefit is to offer you a real dark environment, bringing you a good night's sleep during the day.
  • Noise Reducing: Heavyweight Blackout Lined Curtain Panels can be a good sense of drape, making the window completely closed, to cut noise down. The effect of absorbing sound is 2 times higher than the ordinary 1 layer of curtains so that at any time you are not disturbed by noise.
  • Unique Design: Draperies constructed with 2 layers are all triple weave blackout fabric, balancing room temperature by insulating against summer heat and winter chill meanwhile protect privacy. No chemical coating, no formaldehyde, bring harmony to your family.
  • Easy Care: Quality finishing will withstand years of use. Do not wash the blackout curtains in water, just dry cleaning. Low temperature ironing. Don't use sharp things scratching curtains.

Setting up is much superb as it’s miles while the interior. Again, you could attach a weighted rod or percent pipe at the bottom to keep away from the wayward gust from disfiguring the projection for outdoors. Later on, you see, it’s convenient to set up a curtain display—in all likelihood as it is a lot faster than portray an entire section of your wall—however, it’s susceptible to numerous dangers, along with the following:

  • While indoors, it won’t appear as glossy as painted, constant, or portable displays. It just attaches to fiction as it would be the best if you were also extra innovative to limit its unattractive artful.
  • Regardless of a weighted rod conserving the curtains downward, your display will nonetheless be impressionable to misuse, mainly during the usage of it for outside viewing.
  • You will have to test it cautiously every time you use it to ensure that it doesn’t have creases, folds, or any fallibility that may affect your projection.

#3: DIY Projector Fixed Frame Screen

What is a Projector Screen

A hard and fast display screen is probably your first-class guess while you’re trying to construct the exceptional projector display screen. It permits you to have a full screen that isn’t susceptible to fallibility or deformation while watching. Again, it’s one of the best two techniques that you could use to generate a display screen that takes after a huge flat television. That’s something all of us want for our media room.

There are two cautions with constant monitors, although—it’s greater high priced, and also you’ll have to spend a piece extra time to get the right measurements all the way down to the closing inch. If you’re okay with those things, the subsequent step is to pick the material which you’ll use for the frame:

  • Wood: Timber/wood is the fine fabric that you may use on your display because it’s well built. It also provides you better elasticity when constructing and scheming frames.
  •  PVC: Polyvinyl chloride is insubstantial, making it less difficult as a way to ascend your display to the wall. You may design a well-built display with it; however, you could now not have sufficient elasticity to be imaginative with the mount.
  • Metal: Steel/metal is the weighty substance you may utilize, but it’s the slightest elastic of the three. This substance is extraordinary for constructing monitors that could continue for years.

Distinctive substances have special ways of attaching blackout material. So before you relocate directly to constructing your display screen, figuring out the way to connect your material to those materials:

  • While operating on a timber body, you could lay the fabric flat, glue gun, nails, or use staples to lock it to the mount.
  • While operating on a Polyvinyl chloride (PVC) frame, you have two options: sew the material on the aspect or use a glue gun to maintain its location.
  • While functioning on a metallic frame, you will need two plain bars held in region with screws and the canvas between the bars to hold the material in the vicinity.

In the end, you know how unique substances work in your projector display. Allowing to get it all the way down to the information. Here are some points on how you can construct a permanent projector screen display:

1. Calculate the screen size that you need, based on the throw distance of your projector

Everyone should keep in mind that until the projector has an integral zoom lens, the Throw Distance will always correspond with the scale of the display screen that you will be constructing.

2. Start looking for the best space in your media room

While detecting the location of an area that you can grasp your display screen. So some ways are here, and three things matter the most that you need to think about:

3. Pick the materials that you’ll use.

Now you have the calculation in the vicinity as it will be less complicated to regulate the ideal substances on your projector display screen.

  • For an awning cloth, it is decided to use The Yard’s Roc-Lon White Blackout material as it’s easy to extend and discovering its best while setting up a projector monitor.
  • You may use PVC, wood, or steel for the mount, hanging on how you need your display screen to glance. Again, it is preferable to timber, but you can create extra braces to aid its weight.
  • Minimum five inches of blackout fabric should be left so that you’ll connect to the returned frame.
Roc-Lon Budget Blackout Drapery Lining White, Fabric by the Yard
  • This bestselling blackout drapery muffles sound and helps reduce out-of-room noises at the window. Perfect for homes, nurseries, schools, and workplaces, this drapery lining insulates and helps keep rooms cooler in the summer and warmer in the winter. This 3-pass lining allows you to use the lining as a standalone drapery if desired because it features a layer of white foam, black foam, then a third and final layer of white foam to achieve 100% blackout with both sides of the lining remaining white in color.
  • Washing Instructions: Dry Clean
  • 54'' Wide. Fabric is sold by the yard and cut to order. For example, order of 1 yard (Qty=1) is 54" x 36''. Order of 3 yards (Qty=3) is 54'' x 108''.
  • Made in the USA or Imported

4. Build your projector screen’s frame specifications 

Specifications should be obtained from the projection distance of your projector. Making sure the necessary calculation is needed within the screen and do not encompass space for your mount.

5. Attach your screen to your frame

An important step is here as many humans have problems; however, it’s due to the first-class fabric. If you used a pleasant blackout cloth, you’d be capable of unbending it frivolously and protecting disfigurement with the projection. Here are a few matters that you need to keep in mind while attaching your display:

  • Putting your display horizontally on the ground before the mount. Never set up your display screen with the mount first.
  • Staple the cloth on a woody mount and then sewing the edges while using metallic or PVC mounts.
  • Keep pulling the more screen cloth as you connect it to the mount to decrease creases or wrinkles.

6. Mount the screen on your wall for testing

Everyone should not use too many stitches or staples earlier than trying out because you may want a few modifications to your screen display.

7. If everything looks good, unmount it, then go around the frame to staple it again.

Having 5 inches of gaps in between every staple and then uploading the concluding touch.

#4: Build a Portable Screen (with Stand)

Portable Screen

If the whole lot else won’t work for the media room you’re making plans to construct, you would possibly want to recall a portable projector display screen. It’s also a high-quality alternative if you’re seeking a projector display that you can use indoors, outside, and even in huge spaces.

Thus, it will take more time to set up a portable projector display screen, but it’s better than “cohesive tape” a fabric or striking it on fiction if you want to view anything. And it glances awesome too. So if anyone has much time and price range for it, then stick around as it will be manifested the way to make one.

Right here are the substances that you will want to construct your portable projector display:

  • For PVC pipe cutting, you need a cutter or a saw.
  • For holding PVC pipes together, hard glue is needed.
  • Drilling to make holes over the PVC pipes.
  • Six portions of 10 ft long, 1-inch PVC pipes are needed.
  • 90-degree elbows and 1-inch of eight pieces are needed. 
  •  Forty-five-diploma elbows and pieces of 1 inch are needed.
  • An instant connector.
  • One-inch T-connectors with six pieces are needed.
  • Tape to keep everything in the vicinity.
  • Blackout material, 6×8 ft white paper, or tarp is needed. 

The satisfactory element approximately portable projector displays are that they won’t follow the firm calculation you need to do while constructing constant displays. As you may have already observed, we’re looking to make a display at a minimum of two times the dimensions of most projector display screens. It’ll provide you with better elasticity, allowing you to view films even outside.

Here are some necessary steps that you may comply with while constructing the portable display screen:

 1. Slicing the pipes in step with the scale of your blackout fabric. We’re going to apply 6×8 ft of each cloth, and for which we will want to slash PVC pipes through the following ways given below:

  • Two pipes are measured 102 inches each. 
  • Two pipes are measured 78 inches each. 
  • Two pipes are measured 75 inches each.  

Notice: Scraps should not be thrown here and there because they will be using for the bracing.

2. Setting up an oval frame and locating the muscle to design a truss to assist the frame. So here’s are some necessary steps through which you can construct the frame and help for your display screen:

  • Joining the two 102-inch pipes to the seventy-eight-inch pipes using the ninety-degree elbows.
  • Inserting three T-connectors to each of the 102-inch pipes with a distance of two ft from each other.
  • The region the seventy-five-inch pipes into the T-connectors closest to the corners.
  • Putting ninety-diploma elbows on those pipes, then add an 18-inch % PVC pipe to each of them.
  • Locating the forty-five-degree elbows at the resolution of these short pipes.
  • Joining the seventy-five-inch PVC pipes to those elbows, then to the front T-connectors.
  • Using a direct connector to join the two forty-five-inch pipes. Uploading a 90-degree elbow to every quit.
  • Designing a 3-inch pipe that you’ll use to attach the long pipes to the middle T-connectors.

3. Connect the material to the frame’s border and unbending it out as tons as you can. To make it transportable, you’ll need to connect it to the body using a wire that goes between the pit to your pipe. Lastly, it will let you put off the fabric while you want to keep it in stock.

#5: Blank Wall

Blank Wall

The easiest DIY option that anyone can choose is a blank wall or a blank screen for using a projector. It is immensely diverse and the most cost-efficient way to use a DIY projector screen to reward everyone with benefits. 

The projector can be set up or be used in any situation because it will not cost you many funds wherever you go. Moreover, it is a very monumental trait to use a blank wall as a screen to don’t need to worry about the picture quality or be scared of any interruption related to size or other issues. 

The image can be as large as you want, within the limits of your device. Because your images will have a border whenever you use the original DIY projector screen, you will have to resize the image and other features. And let’s be honest, we all would prefer having one big screen instead of a small computer screen.

1. Factors: 

However, if you have made up your mind that you would like to use it to have a bare wall as a DIY projector screen, several factors need to be considered. For the best possible image quality, you should use a plain white or light-colored wall should be used. 

While using a blank wall, you can work well as a spontaneous DIY projector screen, and it will not matter where you are using it and will not be provided with the best possible video and audio performance quality. 

Many people found that it is not working well using an empty wall as a screen rather than a darker image, as it is quite difficult to relate with some scenes. And the quality is the lack of what you’d get from a real product.

2. Decorations:

You have to keep one thing in mind: there are no types of decorations because pictures or terms on the screen wall will minimize the quality, so the screen wall should be fully blank.  

Other hand, the pictures will be competed with what’s already there as the decoration. So that decorated elements will be the part of the film that does not appear in the background.

3. Texture:

Some texture issues might impact the image quality to get the best results if you need to create a completely smooth wall surface. Textured walls can help to ensure that your image will appear chapped or twisted. 

If you would like to see your wall as a permanent screen of your projector, You can consider grinding it and removing some textures from the wall.

However, a lot of work power with intense work can hold a permanent result, which might not be the solution for everyone.


Setting up a projector display screen is very much uncomplicated, and it offers you sufficient space for innovation to have something corresponding with your structure. Here are the four ways you may construct a projector display:

  • Painting the first-class section of your wall, then using felt tape or velvet to take after a television display screen.
  • It would be best to use a plunge curtain projecting from fiction for indoor and outdoor use.
  • It would be best to create a set display using wooden, PVC, or steel frames to take after a huge flat display.
  • Lastly, building a transportable frame with a detachable screen for viewing easily in both indoor, outside, and even in massive spaces.

-our editorial board has reviewed this article and has been approved for publication according to our editorial policy.

Best Seller List of Projector Screens:

Rate this post

Last update on 2023-12-01

With an impressive 15-year track record in the world of blogging, I have established myself as an expert in this field. The passion for home entertainment and electronics shines through in work, providing readers with valuable information and guidance on creating the ultimate home theater experience.

Leading authority in the field of home theaters and home electronics. With a passion for sharing unique discoveries and personal experiences, I’m dedicated to providing valuable insights to enthusiasts and experts alike.

Through Theater DIY, I continue to be at the forefront of the ever-evolving world of home entertainment, offering expertise that enlightens and inspires.