If you have a DIRECTV remote control and want to program it, there are a few things you need to know. The first thing is that there are two types of DIRECTV remotes: the standard remote and the RC73 Genie remote. The standard remote can be programmed for use with your TV, receiver, or DVR.
The RC73 Genie remote can be programmed for use with your Genie HD DVR or client. To program either type ofremote, you will need the model number and code for your specific device.
- Press and hold the MUTE and SELECT buttons at the same time until the green light under POWER blinks twice, then release both
- Enter 9-8-1 using the number keys (the remote should now be in TV mode)
- Press POWER once (do not hold)
- The TV should turn on or off* (depending on whether it was already powered on)
- If step 3 does not work, try again from step 1 with your TV OFF
- If your model is RC64, RC65, or RC66, proceed to Step 6
- Otherwise, continue with Step 7 6
- Point the remote at your TV and press and hold CH+ until your TV turns off, then release CH+
- Wait 5 seconds and press CH+ again (your TV should turn back on)
- 7) Using the number keys enter code 00173
How To Program New AT&T DIRECTV RC73 Genie Receiver Remote Controller & TV Programming!
How Do I Reset My Rc73 DirecTV Remote?
If you need to reset your RC73 DIRECTV remote, there are a few different ways that you can do so. One way is to hold down the MUTE and SELECT buttons at the same time for three seconds. This should reset your remote.
Another way is to unplug your DIRECTV receiver for about 30 seconds and then plug it back in. Once it has restarted, try using your remote again. If neither of these methods work, you may need to replace your batteries or get a new remote altogether.
What is the Code to Program a DirecTV Remote to a TV?
If you have a DIRECTV remote control, you can program it to work with your TV. To do this, you’ll need to know the code for your TV. Once you have the code, follow these steps:
1. Press and hold the MUTE and SELECT buttons at the same time until the green light on the remote blinks twice.
2. Enter the code for your TV using the number pad on the remote. The green light will blink twice after you’ve entered a valid code.
3. Press and release the POWER button on the remote. The TV should turn off. If it doesn’t, try entering another code until you find one that works.
How Do I Connect My DirecTV Remote to the Receiver?
If you have a DIRECTV remote and receiver, you can connect them in just a few simple steps. First, make sure that your receiver is properly plugged into an electrical outlet and your TV. Then, press and hold the “Mute” and “Select” buttons on your remote at the same time until the light on the top of your remote flashes twice.
After that, use the arrow keys to highlight “Setup” and press “Enter.” From there, select “Remote Control” followed by “Pairing Wizard.” The pairing wizard will guide you through the rest of the process – just follow the prompts on your screen.
Once you’ve completed the pairing process, your remote should be fully functional!
How Do You Manually Program a DirecTV Remote?
If you have a DIRECTV remote that is not working, or if you want to program it to work with a new TV, you can follow these steps. First, find the code for your TV. You can do this by looking in the DIRECTV manual or online.
Once you have the code, turn on your TV and press and hold the MUTE and SELECT buttons at the same time. Enter the code using the number pad on the remote. If the light on the remote blinks twice, that means it is working with your TV.
Credit: entersource.com
How to Program DirecTV Remote to Box
If you have a DirecTV remote and want to know how to program it to your DirecTV box, here are the steps:
1. On your remote, find the “Mode” button. This is typically located at the top of the remote.
2. Press and hold the “Mode” button until the light on the remote blinks twice. This indicates that you’re now in programming mode.
3. Find the code for your DirecTV box in the user manual or online.
Once you have the code, enter it into your remote by pressing the corresponding number buttons. For example, if your code is 1234, you would press 1-2-3-4 on your remote.
4. After you’ve entered the code, press and hold down the “Enter” button until the light on the remote blinks twice again.
Program DirecTV Remote to TV Without Code
If you want to program your DIRECTV remote to work with your TV without using a code, there are a few things you can try. First, if you have a DIRECTV Genie remote, you can hold down the MUTE and SELECT buttons at the same time until the green light blinks twice. Then, use the up/down arrow keys on the remote to change channels.
You should see your TV’s channel number appear in the upper-left corner of the screen.
If that doesn’t work, you can also try programming your DIRECTV remote by pressing and holding the MENU button for three seconds. This will bring up a menu on your TV screen.
Use the arrow keys on the remote to navigate to “Settings” and then select “Remote Control.” From here, you should be able to follow the prompts to program your DIRECTV remote without using a code.
If neither of these methods works, it’s possible that your TV isn’t compatible with your DIRECTV remote.
In this case, you’ll need to find the code for your TV and input it manually. To do this, press and hold down the MUTE and SELECT buttons again until the green light blinks twice. Then enter 9-8-1 followed by either 0 (for standard definition TVs) or 1 (for high definition TVs).
Finally, use the up/down arrow keys on the remote until you see your TV’s brand name appear onscreen. Once you see this, press SELECT and then ENTER. Your DIRECTVremote should now be programmed to work with your TV!
DirecTV Rc73 Remote Codes
If you’re looking for DirecTV Rc73 Remote Codes, you’ve come to the right place. Here at Universal Remote Control Codes, we have a wide variety of codes for different types of devices and brands.
One of the most popular brands that we have code listings for is DirecTV.
The DirecTV brand is known for its high quality and innovative products, so it’s no surprise that their remote controls are some of the best on the market.
The RC73 remote control from DirecTV is one of their top-of-the-line models. It’s packed with features and can be used to control just about any type of device imaginable.
And best of all, it can be programmed to work with just about any type of TV or other equipment that you might have.
So if you’re looking for a great universal remote control that can do it all, the DirecTV RC73 should definitely be at the top of your list!
How to Program Volume on DirecTV Remote Rc73
If you have a DIRECTV remote control (RC) and want to know how to program the volume, this guide will help. The process is simple and only takes a few minutes.
First, find the Volume button on your RC.
It is usually located near the top of the control. Press and hold this button until the light on the controller blinks twice.
Next, use the arrow keys to find the channel you want to adjust the volume for.
Once you have found it, press the Select button. The light on your controller should blink twice again.
Finally, use the Volume up/down buttons to adjust the sound level for that channel.
You can also press Mute if you need to quickly silence any audio coming from your TV. And that’s all there is to it!
Program DirecTV Rc73 Remote to TV Without Receiver
If you want to use your DirecTV RC73 remote control with a new TV, or if you’ve lost the receiver that came with your original DirecTV setup, you’ll need to program the remote to work with the TV. Here’s how:
1. On the back of your remote, press and hold the “Mute” and “Select” buttons until the red light at the top of the remote blinks twice.
2. Enter 9-9-1 on your remote’s keypad. The red light should blink twice again.
3. Press and release the “Power” button on your remote.
The TV should turn off (if it doesn’t, repeat steps 1-3).
4. Point your remote at the TV and press and hold down the “Channel Up” button until the TV turns on again (it will go through a number of channels during this process). Once the TV turns on, release the “Channel Up” button.
If done correctly, all four mode buttons at the top of your remote should light up (TV, DVD, VCR and AUX).
Reset DirecTV Remote Rc73
If your DirecTV remote isn’t working, there are a few things you can try to reset it. First, unplug the power cord from the back of the DirecTV box and wait 30 seconds. Then, plug it back in and wait for the box to reboot.
Once it’s finished rebooting, press and hold the Mute and Select buttons on the remote for three seconds. This will reset the remote and should fix any issues you’re having.
How to Program DirecTV Remote Rc73 to Samsung TV
If you want to program your DIRECTV remote to control your Samsung TV, there are a few things you need to do. First, find thecode for your TV. You can do this by using the DIRECTV code lookuptool.
Once you have the code, follow these steps:
1. Press and hold the MUTE and SELECT buttons at the same time until the green light on the remote blinks twice.
2. Enter 9-9-1 (the default code for Samsung TVs).
The green light should blink twice again.
3. Use the number keys to enter the first four digits of your TV’s code. For example, if your code is 1234, you would press 1-2-3-4 on the number keypad.
4. After you’ve entered the fourth digit of your code, press SELECT. The green light should blink twice again indicating that you’ve successfully programmed your remote!
Program Old DirecTV Remote to TV
If you have an older DirecTV remote that you want to use with your new TV, you can program it to work with your TV. Here’s how:
1. Press and hold the MUTE and SELECT buttons on your remote until the green light flashes twice.
2. Enter 981.
3. Use the arrow keys to highlight your TV brand, then press SELECT. If your brand is not listed, try one of the code search methods below.
4. Press POWER to test your code (the button should turn off and on). If it doesn’t work, repeat steps 2-4 using a different code for your TV brand.
5Method 1: Code Search
1. Press and hold the MUTE and SELECT buttons until the green light flashes twice, then release both buttons.
2 Enter 00000 on your remote’s keypad (five zeros). The green light will flash four times indicating that you’ve entered code search mode
Conclusion
If you have a DirecTV remote that is an RC73, you can program it to work with your television. Here are the steps:
1. Enter the code 0999 on your remote.
The light will blink twice.
2. Press and hold the MUTE and SELECT buttons at the same time until the light blinks twice.
3. Use the number keys to enter the four digit code for your TV brand (you can find this code in DirecTV’s online support).
The light will blink twice when you’ve entered a valid code.
4. Press POWER to test if it worked.
