If you’re having trouble with one of your AirPods Pro not working, there are a few things you can try to fix the issue. First, make sure that both AirPods are in their charging case and that the case has enough power. If they’re not, charge them for at least 30 minutes before trying again.
You should also check to see if there’s any debris or wax buildup in the AirPod’s speaker mesh. To do this, insert a small, soft-bristled brush into the opening on the bottom of each AirPod and gently clean away any dirt or debris.
- If one of your AirPods Pro earbuds isn’t working, start by checking the battery life.
- If the battery is low, charge your AirPods Pro for at least 5 minutes using a Lightning cable connected to a power source.
- Once your AirPods Pro are charged, put them back in their case and close the lid.
- Wait 30 seconds, then open the lid and hold down the setup button on the back of the case for about 15 seconds until you see a white light flash.
- After you see the white light flash, you can let go of the button and your AirPods Pro should be reset and working again!
Right AirPods Pro Not working Here’s fix All Problems
What Could Be Causing My Right Airpod Pro to Not Work?
If you’re having trouble with one of your AirPods Pro, there are a few things you can try to fix the issue. First, make sure that your AirPod Pro is charged. You can do this by checking the LED light on the charging case – it should be white if the AirPod Pro is fully charged.
If not, connect it to power and wait a few minutes before trying again. Next, clean out your AirPod Pro’s ear tip and speaker mesh using a soft, dry, lint-free cloth. If there’s any wax or debris build-up, this can block sound from coming through properly.
If those steps don’t help, try resetting your AirPods Pro. To do this:
1) Press and hold the setup button on the back of the charging case for at least 15 seconds until you see the status light flash amber a few times and then flash white.
2) Open the lid of your charging case and hold down both the Cloudy icon button atop one of your AirPods Pros as well as its stem for about 10 seconds until you see an orange pulsing light followed by a green light that indicates it has reset successfully..
How Can I Fix It If My Right Airpod Pro is Not Working?
If you find that your right AirPod Pro is not working, there are a few things you can try to fix the issue. First, ensure that both AirPods are in their charging case and that the case has power. If your AirPods are charged and they still will not work, try resetting them.
To do this, press and hold the setup button on the back of the case for at least 15 seconds until you see the status light flash white. Once your AirPods have been reset, pair them to your device again. If resetting does not fix the issue, contact Apple Support for further assistance.
Why is Only My Right Airpod Pro Not Working?
If you’re having trouble with just one of your AirPods Pro earbuds, there are a few things you can try to troubleshoot the issue. First, make sure that both AirPods Pro are in their charging case and that the case has enough power. If your case isn’t charged, connect it to a power source using the Lightning cable that came with it.
Next, take a look at your AirPods Pro and make sure that they’re clean. If there’s any dirt or debris build-up on the speaker mesh, use a soft-bristled brush to gently remove it. If you see any wax or gunk blocking the ear tip fitters, use a dry cotton swab to remove it.
Once you’ve cleaned your AirPods Pro, put them back in their charging case and leave them for at least 15 minutes to charge up. After this time has passed, try using just one of your earbuds again – hopefully it will be working properly!
What Do I Do If My Right Airpod Pro Isn’t Working?
If your right AirPod Pro isn’t working, there are a few things you can try to troubleshoot the issue. First, ensure that both AirPods are in their case and that the case lid is closed. Second, check to see if there is any debris or dirt build-up in the charging port of either the AirPods or the case.
If so, use a soft, dry toothbrush to gently remove any buildup. Third, reset your AirPods by pressing and holding the setup button on the back of the case for 15 seconds. Fourth, if you’re still having issues with just one AirPod, contact Apple Support for further assistance.

Credit: osxdaily.com
Right Airpod Not Working Even After Reset
If you’re having trouble with your Right Airpod not working, even after resetting, don’t worry-you’re not alone. Many users have reported this issue, and fortunately, there are a few things you can try to fix it.
First, make sure that your Right Airpod is fully charged.
If it’s not, charge it for at least 30 minutes before proceeding.
Next, take a look at the charging case itself. Make sure that the lid is closed properly and that there’s no debris or dirt blocking the charging port.
If everything looks clean and clear, try plugging the case into a power source and see if the light on the front turns on. If it doesn’t, try using a different cable or charger.
Once you’ve verified that the charging case is working properly, it’s time to reset your Right Airpod.
To do this, press and hold the setup button on the back of the case for about 15 seconds. The light on the front of the case should flash white three times indicating that the reset was successful.
After resetting your Right Airpod, put it back in its charging case and leave it for at least 30 minutes to charge fully before using again.
Once it’s charged up, try using it normally-it should work just fine!
My Right Airpod Isn’t Working
If you’re an AirPods user, you may be familiar with the occasional issue where one of your AirPods stops working. In most cases, this is simply a matter of re-pairing your AirPods with your iPhone or iPad. However, if you find that your right AirPod isn’t working, there are a few things you can try to fix the problem.
First, make sure that both AirPods are in their charging case and that the case has enough charge to power them on. If not, plug the case into a power source and let it charge for a few minutes. Once the case is charged, put both AirPods back in and close the lid.
Wait a few seconds for the light on the front of the case to turn white, indicating that the AirPods are ready to use.
If your right AirPod still isn’t working after being charged, try restarting your iPhone or iPad. To do this, hold down the power button until you see the “slide to power off” slider appear on screen.
Once your device is turned off, press and hold down the power button again until you see Apple’s logo appear. This will boot up your device and hopefully fix any software issues that were causing problems with your AirPod connection.
If neither of these solutions works, there may be an issue with your right AirPod itself.
In this case, it’s best to contact Apple Support or take your device (with both AirPods) to an Apple Store so they can diagnose and repair any hardware issues.
Right Airpod Pro Not Charging
If you’re having trouble with one of your AirPods Pro not charging, there are a few things you can try. First, make sure that both AirPods Pro are in their case and that the case is charged. If that doesn’t work, try resetting your AirPods Pro.
To do this, press and hold the setup button on the back of the case for at least 15 seconds. If resetting doesn’t work, you may need to contact Apple for further support.
Reset Airpods Pro
If your AirPods Pro are acting up, or you want to start fresh with them, you can reset them. Here’s how!
First, make sure your AirPods Pro are in their case and that the case is charged.
Then, open the lid and press and hold the setup button on the back of the case for about 15 seconds. The status light will flash white three times, indicating that your AirPods Pro have been reset.
Now when you connect your AirPods Pro to your iPhone, they should work like new!
Right Airpod Not Charging
One of the most common issues people have with their AirPods is that one of the earbuds won’t charge. If this happens to you, don’t panic! There are a few things you can try to get your AirPods working again.
First, make sure that both AirPods are in their charging case and that the case itself is plugged into a power source. Then, check to see if the light on the front of the case is lit up. If it’s not, that means there’s no power going to the case and you’ll need to plug it in again.
Once you’ve confirmed that there’s power going to the case, take a look at the charging indicators on each AirPod. If one AirPod has a solid white light and the other has a pulsing white light, that means only one is charging. To fix this, simply remove both AirPods from the case and put them back in so they’re sitting side-by-side.
This should kickstart both of them charging correctly.
If your problem persists, there could be an issue with your charging case or one of your AirPods. In this case, we recommend taking them to an Apple Store or authorized service provider for further diagnosis.
Airpods Not Working
If you’re having trouble with your AirPods, there are a few things you can try to get them working again. First, make sure that your AirPods are charged and that the charging case is working properly. If they’re still not working, try resetting them.
If all else fails, you may need to contact Apple for support.
AirPods are one of the most popular wireless headphones on the market, but they’re not perfect. Sometimes users run into issues where their AirPods won’t work properly.
There are a few things that can cause this problem. First, make sure that your AirPods are charged and that the charging case is working properly. If they’re still not working, try resetting them by pressing and holding the setup button on the back of the case for about 15 seconds.
If all else fails, you may need to contact Apple for support.
How to Reset AirPods?
Assuming you would like a step-by-step guide on resetting your AirPods: If your AirPods are having issues and resetting them doesn’t seem to be solving the problem, you can follow these steps to fully reset your AirPods:
- Go to Settings on your iOS device.
- Tap Bluetooth.
- Find the listing for your AirPods in My Devices and tap the info button next to it.
- Tap Forget This Device, then tap Forget Device to confirm.
- Once your AirPods have been forgotten by your iOS device, put them back in the charging case and close the lid.
Wait about 15 seconds, then open the lid and hold down the setup button on the back of the case for about 5 seconds until you see a white flashing light indicating that your AirPods have been reset; this process may take up to 30 seconds before you see a white light flash inside of each earbud.
If successful, you’ll hear an audible chime from both buds signifying they’ve been reset as well as see an LED pulse between each one when checking their status within BT settings post factory reset.
Airpods Not Connecting to iPhone
If your AirPods are having trouble connecting to your iPhone, there are a few things you can try! First, make sure that both your AirPods and your iPhone are charged. If they’re not, charge them up and try again.
Next, check to see if your AirPods are still paired with your iPhone. If they’re not, you’ll need to re-pair them. To do this, open the case next to your iPhone and hold down the button on the back for a few seconds until the light starts flashing white.
Then open the Settings app on your iPhone and tap “Bluetooth.” You should see “AirPods” listed under My Devices – tap it and then tap “Connect.” Finally, restart both your AirPods and your iPhone (hold down the power button on each device for a few seconds until you see the Apple logo).
This should fix the problem!
Conclusion
If you’re having trouble with your AirPods Pro and one of the earbuds isn’t working, there are a few things you can try to fix the issue. First, check to make sure that the earbud is firmly seated in your ear and that there’s no obstruction blocking the speaker grille.
If that doesn’t work, try resetting your AirPods Pro by putting them back in their case and holding down the setup button for at least 20 seconds. If neither of those solutions works, you may need to contact Apple support for further assistance.