How to Fix DirecTV Remote Not Working?

If you are having trouble with your DIRECTV remote, there are a few things you can try to get it working again. First, check the batteries and make sure they are fresh. If that does not work, try resetting the remote by pressing and holding the MUTE and SELECT buttons at the same time for three seconds.

DirecTV Remote Not Responding? Quick Fixes Here

If that does not work, you may need to reprogram your remote.

If your DirecTV remote isn’t working, there are a few things you can try to fix it. First, check the batteries and make sure they’re fresh. If that doesn’t work, try resetting the remote by pressing and holding the MUTE and SELECT buttons at the same time for three seconds.

If that doesn’t work, you may need to reprogram your remote. You can do this by following these steps:

1. Press and hold the MUTE button on your remote while you enter your ZIP code.

2. Enter 99999 as your ZIP code when prompted.

3. Press SELECT.

4. Highlight Device Settings and press SELECT again.

5a) For most devices: Highlight Remote or Remote Control and press SELECT twice quickly; then follow instructions on screen to complete programming (pressing CH up/down until TV responds). Exit when done..

OR 5b) For some other devices: Highlight Manual Setup and press SELECT; then follow instructions on screen to complete programming (pressing number keys 2-9 for component keys). Exit when done.

How Do I Fix My Remote Not Working?

If your remote isn’t working, there are a few things you can try to fix the issue. First, check the batteries and make sure they’re fresh. If that doesn’t work, try resetting the remote by pressing the reset button.

If neither of those solutions work, you may need to reprogram your remote.

How Do You Resync a DirecTV Remote?

How Do You Resync a DirecTV Remote

If your DIRECTV remote isn’t working properly, you may need to resync it with your receiver. Here’s how to do that:

1. Press and hold the MUTE and SELECT buttons at the same time until the green light on the remote flashes twice.

2. Enter 981. This will put your remote into code search mode.

3. Find the code for your DIRECTV receiver using the code search method outlined in your remote’s manual (usually 004 or 113).

4. Once you’ve found the correct code, press and hold the ENTER button until the green light on the remote flashes twice again. Your remote is now synced with your DIRECTV receiver!

DirecTV Remote Not Working How to Fix

DirecTV Remote Not Working After Changing Batteries

If you’ve recently changed the batteries in your DIRECTV remote and it’s not working, there are a few things you can try to get it up and running again. First, make sure you’re using fresh batteries that are the correct type for your remote. If your remote uses AA batteries, for example, don’t try to use AAA batteries.

Next, check to see if the issue is with the remote or with the receiver. To do this, unplug the power cord from your receiver and plug it back in. Then, press and hold down the MUTE and SELECT buttons on your remote until the green light at the top of the remote blinks twice.

This should reset your remote and hopefully fix the problem. If neither of these solutions works, you may need to reprogram your remote to work with your receiver. DIRECTV has a handy online tool that can help you do this: https://www.direcTV.com/DTVAPP/global/contentPageWF.jsp.

DirecTV Remote Not Working Red Light

If your DIRECTV remote isn’t working, the first thing you should do is check the batteries. If they’re low or dead, that’s probably the problem. Once you’ve replaced the batteries, if the red light on your remote is still blinking, it could be a sign that your remote needs to be reprogrammed.

Here’s how to do it:

1. Press and hold the MUTE and SELECT buttons at the same time until the red light blinks twice.

2. Enter 9-8-1 on your keypad (this will put your remote into code search mode).

3. Press CHANNEL UP until your TV turns off (it should take about 30 seconds). If it doesn’t turn off, try again from step 2.

4. Once your TV turns off, press SELECT to lock in the code and save it.

DirecTV Remote Not Working After Reset

If you’re having trouble with your DIRECTV remote, there are a few things you can try to get it working again. First, try resetting the remote by pressing and holding the MUTE and SELECT buttons simultaneously for three seconds. If that doesn’t work, unplug your receiver from power for about 60 seconds and then plug it back in.

You may also need to reprogram your remote if you’ve recently made changes to your account or equipment.

DirecTV Remote Buttons Not Working

If your DIRECTV remote isn’t working properly, there are a few things you can try to fix the issue. First, check the batteries and make sure they’re fresh. If that doesn’t do the trick, try resetting the remote by pressing and holding the MUTE and SELECT buttons at the same time for three seconds.

If that doesn’t work either, give us a call and we’ll be happy to help troubleshoot the issue with you.

DirecTV Remote Will Not Turn off the TV

If your DIRECTV® remote won’t turn off your TV, it’s probably because the power button is stuck in the “On” position. To fix this, simply press and hold the power button for five seconds. This should release the button and allow you to turn off your TV.

If this doesn’t work, there may be something wrong with your remote. Try replacing the batteries or resetting the remote (see below). If neither of these solutions work, you’ll need to contact DIRECTV customer service for assistance.

To replace the batteries in your remote:

1. Remove the battery cover by gently prying it off with a flathead screwdriver or a butter knife. 2. Insert two new AA batteries into the compartment, making sure that they are inserted correctly (i.e., positive end up).

3. Replace the battery cover and screw it on tightly (if applicable).

4. Test the remote to see if it will now turn off your TV. To reset your DIRECTV remote:

1. Press and hold down both the MUTE and SELECT buttons at the same time for three seconds until the green light at the top of the remote blinks twice.

2. Enter 9-8-1 using the number keys on the remote (do not use channel up/down).

How to Sync DirecTV Remote to Box?

If you’re like most people, you probably have a DirecTV remote that came with your DirecTV box. But did you know that you can actually sync your remote to your box? Here’s how:

1. Press and hold the MUTE and SELECT buttons on your remote until the green light at the top of the remote blinks twice.

2. Enter 981 on your remote. The green light should blink four times.

3. Aim the remote at your DirecTV box and press POWER once. The box should turn off. If it doesn’t, repeat steps 1-3.

4. Once the box is off, press CHANNEL UP on your remote until the box turns back on – this will take a few seconds. Once it does, stop pressing CHANNEL UP. You should see a message on screen that says “Applying IR/RF Setup.”

This means that your remote is now synced to your DirecTV box!

DirecTV Remote Not Working Rc73

If your DIRECTV remote isn’t working, there are a few things you can try to fix the issue. First, check the batteries in your remote. If they’re low or dead, replace them with fresh batteries.

If that doesn’t work, try resetting your DIRECTV receiver by unplugging it from power for 30 seconds and then plugging it back in. You can also try reprogramming your remote to work with your receiver. For instructions on how to do this, visit DIRECTV’s website or contact customer service.

Program DirecTV Remote to TV Without Code

How to Program Replacement DirecTV Remote

If you want to program your DIRECTV remote to work with your TV without using a code, it’s actually pretty easy. Here’s how:

  1. Press and hold the MUTE and SELECT buttons at the same time until the light on the remote control blinks twice.
  2. Enter 9-9-1 (the default code) followed by the Enter button. The light should blink twice again.
  3. Use the Channel Up/Down buttons to change channels and the Volume Up/Down buttons to adjust the volume.

    The MUTE button will also mute/unmute your TV.
  4. To save these settings, press and hold the MUTE and SELECT buttons again until the light on the remote blinks twice.

Conclusion

Are you having trouble with your DIRECTV remote? If it’s not working properly, there are a few things you can do to try to fix it. First, check the batteries and make sure they’re fresh.

If that doesn’t work, try resetting the remote by pressing the MUTE and SELECT buttons at the same time for three seconds. If that doesn’t work, you may need to reprogram your remote. You can do this by following the instructions in your owner’s manual or by calling DIRECTV customer service.

Rate this post

TheaterDIY is a dedicated platform where I passionately share my vast knowledge and experiences in the realm of home theaters and home electronics. My expertise and insights are a guiding light for enthusiasts seeking to create their own cinematic havens.