If your DIRECTV remote isn’t working, there are several things you can try to fix it. First, check the batteries and make sure they’re fresh. If that doesn’t work, try resetting the remote by pressing and holding the MUTE and SELECT buttons for three seconds.
If that doesn’t work, you can try reprogramming the remote to your TV.
If your DIRECTV® remote isn’t working, there are a few things you can do to try and fix it. First, check the batteries. If they’re low or dead, replace them with fresh ones.
If that doesn’t work, try resetting your receiver by unplugging it from the power outlet for 30 seconds, then plugging it back in. You can also try re-pairing your remote with your receiver. To do this, press and hold the MUTE and SELECT buttons on your remote until the green light at the top blinks twice.
Then enter 9 8 1 on your remote’s keypad. Once you’ve done that, point the remote at your receiver and press CHANNEL UP. You should see a message on screen telling you that your remote is paired with your receiver.
If none of these troubleshooting tips work, give us a call at 1-800-531-5000 and we’ll be happy to help.
DIRECTV Remote Not Working? One Button, Some Buttons or All Buttons Don't Work? Try This First!
How Do You Resync a DirecTV Remote?
If you have a DIRECTV remote that isn’t working properly, you can try to resync it with your DIRECTV receiver. Here’s how:
1. Check the batteries in your remote.
If they are low, replace them with fresh batteries.
2. Unplug your DIRECTV receiver from its power source for 30 seconds, then plug it back in.
3. Press and hold the MUTE and SELECT buttons on your remote until the green light at the top of the remote blinks twice.
This should take about 10 seconds.
4. Enter 981 on your remote’s keypad. The green light should blink twice again to indicate that the reset was successful.
How Do I Fix My Remote Not Working?
Assuming you’re referring to a TV remote:
There are a few things you can try if your TV remote has stopped working. First, check the batteries and make sure they’re properly inserted.
If that doesn’t work, try resetting the remote by removing the batteries and holding down the power button for 30 seconds. If neither of those work, there may be something blocking the infrared sensor on the remote or on the TV itself. Try cleaning off the sensor with a soft cloth and see if that does the trick.
Finally, if none of these solutions work, you may need to replace your remote.
Why Did My Remote Stop Working Suddenly?
If your remote suddenly stops working, there are a few possible reasons why. The most common reason is that the batteries in the remote are dead and need to be replaced. If you have recently changed the batteries in the remote and it still isn’t working, then it’s possible that the issue is with the actual remote itself.
It’s also possible that there is something interfering with the signal between the remote and your TV or other device, such as a power strip or electrical outlet. If you’ve ruled out all of these potential issues, then you may need to contact your TV or device manufacturer for further troubleshooting assistance.
Credit: www.allconnect.com
DirecTV Remote Not Working After Changing Batteries
If you’ve recently changed the batteries in your DIRECTV remote and it’s not working properly, there are a few things you can check to troubleshoot the issue.
First, make sure that you’re using fresh batteries that are correctly installed. If the batteries are low or installed incorrectly, this can prevent the remote from working properly.
Next, check to see if the red light on the front of the remote is blinking when you press a button. If not, this could indicate that the remote isn’t paired with your receiver. To fix this, simply unplug your receiver from power for 30 seconds and then plug it back in.
This will reset the pairing between the remote and receiver and should fix the problem.
If you’re still having trouble with your remote after following these steps, please contact DIRECTV customer service for further assistance.
How to Sync DirecTV Remote to Box
If you have a DirecTV remote and want to use it with your DirecTV box, you’ll need to sync the two devices. Here’s how:
1. Press and hold the MUTE and SELECT buttons on the remote for about three seconds.
The green light at the top of the remote should blink twice.
2. Enter 981 on your remote’s keypad. The green light should blink four times.
3. Point the remote at your DirecTV box and press POWER once. The box should turn off. If it doesn’t, repeat steps 1-3.
Once you’ve successfully synced your DirecTV remote with your box, you can use it to control all of the functions of your DirecTV service. Enjoy!
DirecTV Remote Buttons Not Working
If you find that your DIRECTV remote buttons are not working, there are a few things you can try to fix the issue. First, check the batteries in your remote and replace them if necessary. If that doesn’t solve the problem, try resetting your remote by pressing and holding the MUTE and SELECT buttons at the same time for three seconds.
If that doesn’t work either, you may need to reprogram your remote to work with your DIRECTV receiver. To do this, follow these steps:
1. Press and hold the MUTE button on your remote for three seconds.
2. While holding down MUTE, press and release SELECT.
3. Enter 9-8-1 on your remote’s keypad (this will put your remote into pairing mode).
4. Press and hold POWER on your DIRECTV receiver until it turns off (about five seconds).
Then press it again to turn it back on.
5. Once your receiver has rebooted, find the pairing code on its display screen (it will be a four-digit code). Enter this code on your remote’s keypad within 30 seconds and then press SELECT.
Yourremote should now be programmed to work with your DIRECTV receiver!
DirecTV Remote Not Changing Channels
If your DIRECTV remote isn’t changing channels, there are a few things you can try to fix the issue. First, check the batteries in your remote and replace them if necessary. If that doesn’t work, try resetting your receiver by unplugging it from power for 30 seconds and then plugging it back in.
You can also try reprogramming your remote by following the instructions in your DIRECTV user manual. If none of these solutions work, contact DIRECTV customer service for further assistance.
DirecTV Remote Not Working Rc73
If your DIRECTV remote isn’t working properly, there are a few things you can try to fix the issue. First, check the batteries and make sure they’re fresh. If that doesn’t do the trick, try resetting the remote by pressing and holding the MUTE and SELECT buttons at the same time for three seconds.
You should also check to see if your remote is on the correct mode by pressing the TV button (top left corner) once. Finally, if none of these troubleshooting tips work, you may need to replace your remote entirely.
DirecTV Genie Remote Volume Not Working
If you have a DirecTV Genie remote and you’re having issues with the volume not working, there are a few things you can try. First, make sure that the batteries in your remote are fresh and installed correctly. If that doesn’t work, you can try resetting your remote by holding down the MUTE and SELECT buttons for three seconds.
If neither of those solutions work, you may need to contact DirecTV customer service for further assistance.
DirecTV Remote App
If you have a DIRECTV remote control, did you know that there is also a DIRECTV app for your smartphone or tablet? The DIRECTV Remote App lets you control your DIRECTV receiver from anywhere in your home. Plus, it’s easy to set up and use.
Here’s everything you need to know about the DIRECTV Remote App.
What is the DIRECTV Remote App?
The DIRECTV Remote App is an app for your smartphone or tablet that allows you to control your DIRECTV receiver.
With the app, you can change channels, search for shows, record programs, and more. The app also lets you customize your viewing experience by creating a list of favorite channels.
How do I set up the DIRECTV Remote App?
You can download the DIRECTV Remote App from the Apple App Store or Google Play Store. Once you’ve downloaded the app, open it and sign in with your DirecTV account information. Then, follow the on-screen instructions to connect your device to your DirecTV receiver.
Once you’re connected, you’re ready to start using the app!
How do I use the DIRECTV Remote App?
Using the DirecTV Remote App is easy!
Just open the app and point your device at your DirecTV receiver. Then, use the touchscreen controls to change channels, search for shows, record programs, and more. You can also use voice commands to control your DirecTV receiver hands-free.
To use voice commands with the DirecTV Remote App, just tap on the microphone icon and speak into your device.
Program DirecTV Remote to Genie
If you have a Genie remote and want to know how to program it, we’ve got you covered. In this blog post, we’ll walk you through the steps on how to program your DirecTV remote to your Genie DVR.
First, find the “Mode” button on your remote.
Once you’ve found it, press and hold down the “Select” and “Mute” buttons at the same time. While continuing to hold those two buttons down, press and release the “Mode” button three times. You should see the green light on your remote flash twice.
Once you’ve done that, use the arrow keys on your remote to highlight either “TV,” “AUX,” or “DVD.” Then press the “Enter” button in the center of your remote. The green light on your remote should flash twice again.
If you’re programming your DirecTV Remote for a TV, once you’ve highlighted TV and pressed enter, use the arrow keys to highlight either Standard Definition (SD) or High Definition (HD). If you have an HD television, select HD; if not, select SD. After making your selection, press enter again and then point your remote at your TV and press power once.
Your TV should turn off indicating that you’ve successfully programmed your DirecTV Remote for use with a TV! If it doesn’t turn off or if pressing power does nothing at all:
-Make sure there are no obstructions between theremote andthe front ofyour DIRECTVreceiver(GenieDVR), suchas another remotecontrol.
-Checkthatthe batteriesare freshand insertedcorrectly into theremote control.-Tryto reprogramtheremoteforyour DIRECTVreceiver(GenieDVR).
Conclusion
If your DirecTV remote isn’t working, there are a few things you can try to fix it. First, check the batteries and make sure they’re fresh. If that doesn’t work, try resetting the remote by holding down the MUTE and SELECT buttons for three seconds.
If that doesn’t work, call DirecTV customer service for assistance.
